Traditional wastewater treatment system

In case of so-called “open” wastewater treatment systems, the clean wastewater won’t be reused in the technology. The treated wastewater can be led according to the requirements into the canalization. The settled, pressed and dried sludge can be removed easily from the system.

The wastewater treatment happens cyclicly. The process takes place in a separate reactor tank. The treated wastewater can be led after settling, through sludge press, according to the requirements into the canalization. The settled, pressed and dried sludge can be removed easily from the press.

The wastewater treatment occurs continuously. This system can be used in case of higher wastewater volumes. The treatment process takes place in separate units. The chemical process happens in 3 reactors, the settling process in the settling unit. The treated wastewater can be led into a tank, after the end control procedure, according to the requirements into the canalization. The pressed and dried sludge can be removed easily from the settling unit by means of sludge press.